Install Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware ipv6
Display Layer 3 IPv6 ACL data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 ipv6 acl stack-unit number port-set 0–0 pipeline
pipeline-number
Parameters
ipv6 acl Enter the keyword ipv6 acl to select IPv6 ACL data.
stack-unit
number
Enter the keywords stack-unit then a number to select a stack ID. The range is
from 1 to 6.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The range is from 0 to 0.
pipeline pipeline-
number
Enter the keyword pipeline with a pipeline number to display the MAC ACL
entries specific to the pipeline number. The range is from 0 to 3.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Debugging and Diagnostics 511