Install Guide

serial console
Use the serial console to set the serial console baud rate.
Syntax serial console <int> <int>
Parameters
serial console
[unit] [baud]
Enter the keyword to set the serial port baud rate. The supported values for serial
console:
● Unit - 0
● Baud rate -9600,115200
No defaults.
Command Modes BOOT_USER
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example Serial
BOOT_USER # serial console 0 9600
BOOT_USER # BOOT_USER #
show bootvar
Display boot configuration information.
Syntax
show bootvar
Command Modes BOOT_USER
Command
History
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
Boot Command Line Interface 333