Install Guide

Example
DellEMC#show vxlan vxlan-instance 1 physical-locator
Instance : 1
Tunnel : count 1
36.1.1.1 : vxlan_over_ipv4 (up)
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance statistics interface
Displays the port VLAN statistics information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID statisitics
interface interface VLAN-ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
interface Enter the following keywords and the interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE
then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port/subport information.
● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
● For a Port Channel, enter the keywords port-channel.
VLAN-ID Enter the VLAN ID.
Defaults Disabled
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Example
DellEMC#show vxlan vxlan-instance 1 statistics interface fortyGigE
1/49/1 100
Port : Fo 1/49/1 Vlan : 100
Rx Packets : 13
Rx Bytes : 1317
Tx Packets : 13
Tx Bytes : 1321
1682 Virtual Extensible LAN (VXLAN)