Install Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Example
DellEMC#show vxlan vxlan-instance 1 logical-network
Instance : 1
Total LN count : 1
Name VNID
bffc3be0-13e6-4745-9f6b-0bcbc5877f01 4656
DellEMC#$n-instance 1 logical-network n 2a8d5d19-8845-4365-
ad04-243f0b6df252
Name : 2a8d5d19-8845-4365-ad04-243f0b6df252
Description :
Tunnel Key : 2
VFI : 28674
Unknown Multicast MAC Tunnels:
192.168.122.133 : vxlan_over_ipv4 (up)
Port Vlan Bindings:
Tf 1/8: VLAN: 2 (0x80000001),
Fo 1/49/1: VLAN: 2 (0x80000004),
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance physical-locator
Displays physical locators related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID physical—locator [vtep-ip A.B.C.D]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
A.B.C.D Enter the IP address of the VTEP.
Defaults Disabled
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–
ON, S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Virtual Extensible LAN (VXLAN) 1681