Install Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1671

Table Of Contents

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–

ON, S6100–ON, and Z9100–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100–ON.

9.10(0.1P10) Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S6000.

Example

DellEMC#show vxlan vxlan-instance 1

Instance : 1

Admin State : enabled

Management IP : 192.168.200.200

Gateway IP : 3.3.3.3

MAX Backoff : 30000

Controller 1 : 192.168.122.6:6632 ssl (connected)

Fail Mode : secure

Port List :

Fo 1/49/1 Tf 1/16 Tf 1/20 Po 2

Commands

vxlan-instance- Enable VXLAN Instance configuration on the platform.

show vxlan vxlan-instance logical network

Displays logical network information related to Network Virtualization Overlay (NVO) Gateway.

Syntax

show vxlan vxlan-instance instance ID logical-network [name name]

Parameters

instance ID

Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the

initial release.

name

(OPTIONAL) Enter the keyword name and enter the name of VXLAN logical

network up to a length of maximum 30 characters.

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

EMC Networking OS Command Line Reference Guide.