Install Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate a specific VNID to a remote VTEP. Provide a valid profile name while
associating to the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses configured in the
switch.
vnid
Associate a range of VNID numbers to a specific VNI profile.
Syntax
vnid VNID-Range
To remove the association, use the no vnid command.
Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specific VNI profile. The
range is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate the specified range of VNIDs to a VNI profile.
vni-profile
Create a VNI profile to associate with remote VTEP configuration.
Syntax
vni—profile profile name
To delete the VNI profile, use the no vni-profile command.
Parameters
profile name Enter a valid and unique profile name. The profile name can have a maximum of 32
characters.
Defaults None
Command Modes VXLAN-INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Virtual Extensible LAN (VXLAN) 1675