Install Guide

For a L2 Input Policy Map pmap_l2, the output must be as follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port |
Status
| | | |per Port
|(Allowed ports)
0 0 L2ACL 500 200
Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200 Allowed
(2)
DellEMC#
DellEMC# test cam-usage service-policy input pmap_l2 stack-unit all
For a L2 Input Policy Map pmap_l2, the output must be as follows,
stack-unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port |
Status
| | | |per Port
|(Allowed ports)
0 0 L2ACL 500 200
Allowed (2)
0 1 L2ACL 100 200
Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200 Allowed
(2)
DellEMC#
DellEMC# test cam-usage service-policy input pmap_l2 stack-unit all
Stack-unit | Portpipe | Tile | CAM Partition | Available CAM | Estimated CAM per Port | Status
------------------------------------------------------------------------------------------
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
Syntax
threshold min number max number max-drop-drop
To remove the threshold values, use the no threshold min number max number command.
Parameters
min number Enter the keyword min then the minimum threshold number for the WRED profile.
The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number for the WRED profile.
The range is from 1 to 9360 KB.
max-drop-drop
number
Enter the keyword max-drop-drop followed by the maximum number of packets
for the WRED profile. The range is from 0 to 100 KB
Quality of Service (QoS) 1271