Install Guide

Example (VLT)
DellEMC# show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Vlan 30
(50.1.1.2, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Usage
Information
The following describes the show ip mroute command shown in the following example.
Field Description
(S, G) Displays the forwarding entry in the multicast route table.
uptime Displays the amount of time the entry has been in the multicast forwarding table.
Incoming
interface
Displays the reverse path forwarding (RPF) information towards the source for
(S,G) entries and the RP for (*,G) entries.
Outgoing
interface list:
Lists the interfaces that meet one of the following:
● a directly connected member of the Group
● statically configured member of the Group
● received a (*,G) or (S,G) Join message
Example
DellEMC# show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: twentyFiveGigE 1/12
Outgoing interface list:
twentyFiveGigE 1/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: twentyFiveGigE 1/4
Outgoing interface list:
twentyFiveGigE 1/12
twentyFiveGigE 1/13
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: twentyFiveGigE 1/12
Outgoing interface list:
twentyFiveGigE 1/4
show ip rpf
View reverse path forwarding.
Syntax
show ip rpf
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
1012 Multicast