Glossary

drop icmp
Drops the ICMPv4 and ICMPv6 packets.
Syntax
drop {icmp | icmp6}
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other Platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11.0.0 Introduced on the S4810, S4820T, S3048–ON, S3100 Series, S4048–ON, S5000,
S6000, S6000–ON, Z9500, Z9100–ON, S6100–ON, S6010–ON, S4048T–ON,
C9000, and MXL.
Usage
Information
When the drop icmp feature is configured, the system drops the ICMP reply messages on the front end
and management interfaces. By default, the Dell EMC Networking OS responds to all the ICMP messages.
NOTE: There is no separate CLI to enable IP ID randomness. By default, the IP ID in the kernel is
randomized.
For more information on the ICMP message types, see the ICMP Commands section.
System Security Commands
The following section lists the system security commands.
boot-access password
Set a password for the boot loader.
Syntax
boot-access password [encryption-type] boot-password
To remove the GRUB access password, use the no boot-access password command.
Parameters
encryption-type
(OPTIONAL) Enter an encryption type for the boot password.
● 0 directs the system to store the password as clear text.
● 7 directs the system to store the password with a dynamic salt.
boot-password Enter the boot access password.
Defaults None
Command Modes CONFIGURATION.
Command
History
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.14(0.0) Introduced on the S5048F–ON.
9.13(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, and Z9100–ON.
Usage
Information
If you enable the boot access password, the system prompts for a password when you access any option
on the boot screen.
When you configure the boot access password, ensure that your password meets the following criteria:
● A minimum of eight characters in length
Security 1467