Quick Start Manual

Installing and Configuring the Operating System 17
6 Check the logs to verify that all drivers were installed correctly.
NOTE: Log information can be found at:
<Primary Drive:/>Dell_Resource_CD/logs>.
7 When the installation is complete, remove the media from the CD drive.
Verifying the Temporary Directory Paths
Verify that the paths to the Temp and Tmp directories are set correctly.
1
Click Start  Run .
2 In the Open field, type cmd and click OK .
3 At the command prompt, type echo % Temp% and press <Enter>.
The following path is displayed:
%SystemDrive%\Temp
where, %SystemDrive% is the local drive.
4 At the command prompt, type echo %Tmp% and press <Enter>.
The following path is displayed:
%SystemDrive%\Temp
where, %SystemDrive% is the user's local drive.
5 Repeat step 1 through step 4 for all nodes in the cluster.