Owner's Manual
50 Setting Up an iSCSI Cluster
g
Enter the CHAP user name defined in EqualLogic storage in the
User
name
box.
h
Enter the CHAP password defined in EqualLogic storage in the
Ta rg et
secret
box.
NOTE: The CHAP password must be at least 12 characters long.
i
Click
OK
.
4
In the
Ta rg et s
tab of the
iSCSI Initiator Properties
window, click on one
volume that was created for the Oracle database and click
Connect
.
5
On the
Connect to Target
window, select both
Add this connection to the
list of Favorite Targets
and
Enable multi-path
and click
Advanced
.
6
On the
General
tab in the
Advanced Settings
window, perform the
following configurations:
a
Choose
Microsoft iSCSI Initiator
using the
Local adapter
drop-down
menu.
b
Choose an
iSCSI initiator IP address
using the
Source IP
drop-down
menu.
c
Choose
EqualLogic group IP address
using the
Target Portal
drop-down menu.
d
Select
CHAP logon information
.
e
Enter the CHAP user name defined in EqualLogic storage in the User
name box.
f
Enter the CHAP password defined in EqualLogic storage in the Target
secret box.
g
Click
OK
.
7
On the
Connect to Target
window, click
OK
.
8
On the
Ta rge ts
tab of the
iSCSI Initiator Properties
window, the status of
the logged on volume should be
Connected
.
9
Repeat step 3 to step 8 to log on to the same volume for every other iSCSI
initiator IP addresses.
10
Repeat step 3 to step 9 to log on to all other volumes created for the
database.
11
Repeat step 1 to step 9 on all other hosts in the cluster.