Owner's Manual

Configuring Your Network 19
Entering the Remote Access Configuration Utility
1 Turn on or restart your system.
2 Press <Ctrl><E> when prompted after POST.
If your operating system begins to load before you press <Ctrl><E>, allow
the system to finish booting, and then restart your system and try again.
Remote Access Configuration Utility Options
Table 2-4 lists the Remote Access Configuration Utility options and shows
how to configure the BMC on a managed system. After entering all settings,
press <Esc> and select one of the following:
• Save Changes and Exit-Keep all entries made in the Remote Access
Configuration Utility
.
•
Discard Changes and Exit-Undo all entries made in the Remote Access
Configuration
Utility .
•Return to
Setup-Continue using the Remote Access Configuration
Utility .