Owner's Manual
12 Configuring Your Network
n
On the information message window click
Yes
to proceed.
o
On the
Broadcom Advanced Control Suite 3
window, click
File
Exit
.
5
Repeat step 1 to step 4 on the remaining nodes.
NOTE: It is recommended to have the two bonded NIC ports for the private network
on separate PCI buses. For example, a bonded pair can consist of one on-board NIC
(LOM) and one add-on NIC card.
Configuring the IP Addresses for Your Public and
Private Network Adapters
1
Update the adapter's network interface name, if required. Otherwise, go to
step 2.
a
On node 1, click
Start
Administrative Tools
Server Manager
View Network Connections
.
b
On the
Network Connections
window, right-click the public network
adapter you want to rename, and select
Rename
.
NOTE: The Oracle database installer generates an error and prevents you
from completing the installation procedure if you do not use identical names
for the public adapters and the private adapters on all cluster nodes. It is
highly recommended that you use identical names for public and private
adapters when you configure your network adapters on the cluster nodes.
c
Rename the public adapter name to
Public
and press <Enter>.
d
Right-click the Private NIC team you want to rename and select
Rename
.
e
Rename the Private NIC team to
Private
and press <Enter>.
2
Configure the IP addresses.
a
Click
Start
Administrative Tools
Server Manager
View
Network Connections
Public
Properties
.
b
Double-click
Internet Protocol (TCP/IP)
.
c
Click
Use the following IP address
, enter the required IP address,
default gateway address and the DNS server IP address, and click
OK
.
d
Click
OK
.