Owner's Manual

10 Installing Oracle 11g R2 Database RAC
a Provide the following data in the Grid Plug and Play Information
window:
•
Cluster Name —Enter a name for your cluster. For example,
testcluster .
•
SCAN Name —Enter a unique name with domain name as the
GNS sub-domain. For example,
scancluster.clusterdomain.example.com .
•
SCAN Port —Retain the default port number, 1521 .
•
Configure GNS —Check this option.
•
GNS sub-domain —Enter the configured GNS sub domain name.
For example,
clusterdomain.subdomain.com . See the DNS server
configurations for the sub-domain delegation in the
Oracle
Database on Microsoft Windows Server x64 Storage and
Networking Guide
.
•
GNS VIP address —Enter the GNS VIP address. For example,
192.0.2.2 . See the GNS VIP address that is pre-configured in
the DNS server in the
Oracle Database on Microsoft Windows
Server x64 Storage and Networking Guide
.
b Click Next .
14 In the Cluster Node Information window, add the nodes that must be
managed by
Oracle Grid Infrastructure :
a Click Add .
b Add Public Host Name information according to the
%SystemRoot%\system32\drivers\etc\hosts file entry.
c Enter the Virtual IP Name as per the following instructions:
If you are configuring the cluster without GNS, enter the value
according to the
%SystemRoot%\system32\drivers\etc\hosts file entry.
If you are configuring the cluster with GNS, this value is set to
AUTO .
d Repeat step a to step c to add all the nodes in the cluster.
e Click Next .