Owner's Manual

Troubleshooting 9
To resolve the issue, perform the following steps:
1
Perform the /etc/init.d/oracleasm createdisk operation using
the following command:
/usr/sbin/asmtool -C -l /dev/oracleasm -n <volume name> -s /dev/<emc
device> -a force=yes
The following message is displayed:
asmtool: Device "/dev/<emc device>" is not a
partitionasmtool: Continue anyway.
2
The permissions of the volume under /dev/oracleasm/disks/ will be
root: root . Reboot the system to correct it.
3 You can now use the device using the PowerPath device name.
For detailed instructions, see the Oracle Note # 469163.1 at
support.oracle.com.
Miscellaneous
Oracle Clusterware Verification Utility Fails After the Grid Infrastructure
Installation
The issue occurs when the Grid Naming Service (GNS) Virtual IP (VIP) entry
is not present in the /etc/resolv.conf file.
After the successful grid infrastructure installation, runInstaller (GUI)
displays the following error message: INS-20802: Oracle
Clusterware Verification Utility failed.
Also, the following error messages are logged in the oraInventory log files:
INFO: PRVF-4664: Found inconsistent name resolution
entries for SCAN name "scancluster"
INFO: PRVF-4657: Name resolution setup check for
"scancluster" (IP address: 190.10.1.101) failed.
To resolve this issue, add the GNS VIP IP into the /etc/resolv.conf file.
11GR2TG.book Page 9 Wednesday, August 4, 2010 12:31 PM