Owner's Manual

58 Setting Up an iSCSI Cluster
Iface Name: eth1-iface
Target: iqn.2001-05.com.equallogic:0-8a0906-
93ee59d02-674f999767d4942e-mdi-data1
Portal: 10.16.7.100:3260,1
Iface Name: eth0-iface
Iface Name: eth1-iface
Target: iqn.2001-05.com.equallogic:0-8a0906-
95ce59d02-2e0f999767f4942e-mdi-data2
Portal: 10.16.7.100:3260,1
Iface Name: eth0-iface
Iface Name: eth1-iface
Target: iqn.2001-05.com.equallogic:0-8a0906-
97be59d02-d7ef99976814942e-mdi-fra1
Portal: 10.16.7.100:3260,1
Iface Name: eth0-iface
Iface Name: eth1-iface
iSNS:
No targets found.
STATIC:
No targets found.
12
Log in to all targets (volumes) from each interface you created in step 5:
iscsiadm -m node -p group_ip_address --interface
iface_name --login
,
where,
group_ip_address is the IP address of the EqualLogic storage
group, and
iface_name is the network interface (as defined in step 5) on
the host that is used for iSCSI traffic.
The following example logs into three volumes from each of the two
ifaces
(
eth0-iface and eth1-iface ) on a host.
# iscsiadm -m node -p 10.16.7.100 --interface
eth0-iface --login
Logging in to [iface: eth0-iface, target:
iqn.2001-05.com.equallogic:0-8a0906-90ee59d02-
e26f999767b4942e-mdi-ocr, portal:
10.16.7.100,3260]
Lnx_Stnwt.book Page 58 Wednesday, August 4, 2010 11:58 AM