Owner's Manual

22 Configuring Your Network
6 Verify that BMC is accessible and controllable from a remote node in
your cluster using the bmc info command.
For example, if node2-ipmi is the network host name assigned to BMC
for node2, then to verify the BMC on node2 from node1, enter the
following command on node1:
$ ipmitool -H node2-ipmi -U bmcuser -P password
bmc info
Where bmcuser is the administrator account and password is the
password.
If BMC is correctly configured, then the information about BMC on the
remote node is displayed. If you see an error message, such as Error:
Unable to establish LAN session, check the BMC
configuration on the remote node.
Lnx_Stnwt.book Page 22 Wednesday, August 4, 2010 11:58 AM