Owner's Manual

20 Configuring Your Network

Access Available : call-in / callback

Link Authentication : disabled

IPMI Messaging : disabled

Privilege Level : NO ACCESS

. . .

Assign the desired administrator user name and password and enable

messaging for the identified slot. Also set the privilege level for that

slot when accessed over LAN (channel 1) to ADMIN (level 4). For

example:

# ipmitool user set name 4 bmcuser

# ipmitool user set password 4 password

# ipmitool user enable 4

# ipmitool channel setaccess 1 4 privilege=4

# ipmitool channel setaccess 1 4 link=on

# ipmitool channel setaccess 1 4 ipmi=on

Where

bmcuser

is the administrative user name, and

password

is the

password.

Verify the setup using the command

lan print 1

. The following

output must be displayed:

# ipmitool lan print 1

Set in Progress : Set Complete

Auth Type Support : NONE MD2 MD5 PASSWORD

Auth Type Enable : Callback : MD2 MD5

: User : MD2 MD5

: Operator : MD2 MD5

: Admin : MD5 PASSWORD

: OEM : MD2 MD5

Lnx_Stnwt.book Page 20 Wednesday, August 4, 2010 11:58 AM