Owner's Manual

Troubleshooting 15
Fibre Channel Storage System
I/O Errors and Warnings are Displayed When You Load the Fibre Channel
HBA Driver Module
You must update the HBA driver, BIOS, and firmware for the Fibre Channel
module. For the supported versions, see the Solution Deliverable List (SDL)
on dell.com/oracle.
Operating System
Operating System Does Not Recognize a New Peripheral Device
When you add a new peripheral device to the Dell PowerEdge system, the
operating system does not recognize the device. The issue occurs when
Kudzu is disabled.
Run Kudzu manually after you add the new peripheral to your system.
Hard Disks are Not Detected During the Operating System Installation on
the Dell PowerEdge Systems With the Dell PERC H200 Integrated Adapter
Use the driver update disk during the operating system installation if
the Dell PERC H200 Integrated adapter is used for configuring RAID on
the internal hard disk.
For more information on using the driver update disk during installation,
see the ReadMe file of the driver update disk. Download the driver
update disk from support.dell.com.