Owner's Manual

10 Installing Oracle 11g R2 Database RAC
• SCAN Port — Retain the default port number, 1521 .
•
Configure GNS — Check this option.
•
GNS sub-domain — Enter the configured GNS sub domain
name. For example,
clusterdomain.example.com . See the DNS
server configurations for the sub-domain delegation in the
Oracle
Database on Enterprise Linux x86_64 Storage and Networking
Guide
.
•
GNS VIP address — Enter the GNS VIP address. For example,
192.0.2.2 . See the GNS VIP address that is pre-configured
in the DNS server in the
Oracle Database on Enterprise Linux
x86_64 Storage and Networking Guide
.
b Click Next .
12 In the Cluster Node Information window, add the nodes that must be
managed by
Oracle Grid Infrastructure :
a Click Add .
b Add Public Host Name information according to the /etc/hosts file
entry.
c Enter the Virtual IP Name as per the following instructions:
If you are configuring the cluster without GNS, enter the value
according to the
/etc/hosts file entry.
If you are configuring the cluster with GNS, this value is set to
AUTO .
d Repeat step a to step c to add all the nodes in the cluster.
e Click the SSH connectivity button at the bottom of the window.
f In the OS Username field, provide the Oracle Grid Infrastructure
Owner
name.For example, grid . In the OS Password field enter the
password for the same user.
g Click Test at the bottom of the window to test the SSH connectivity
between the selected nodes. If there are any issues with the
connectivity, use the
Setup option to provide the correct settings.
h Click Next .