Owner's Manual

44 Setting Up an iSCSI Cluster
Verifying and Upgrading the Firmware
1 Discover the direct-attached storage of the host system using the Modular
Disk Storage Manager software that is installed on the host system.
2 Verify that the firmware for the following storage components is at
the minimum required version.
• MD3000i storage system firmware
• MD1000 expansion enclosure firmware
NOTE: For the minimum firmware version requirements, select the Dell Validated
Components link at dell.com/oracle.
Post Installation Tasks
After installing the drivers and the software, perform the post installation
tasks listed in the PowerVault MD3000i Installation Guide at
support.dell.com/manuals, to create the environment shown in Table 5-1
on page 39.