Quick Start Manual

14 Software and Hardware Requirements
Dell PowerEdge 2970, R805 systems (up
to 2 nodes using Automatic Storage
Management (ASM))
• AMD Opteron™ processor family.
• 1 GB of RAM.
• Two 73-GB hard drives connected to an
internal RAID controller.
NOTE: It is recommended to use two
73-GB hard drives (RAID 1) connected to
an internal RAID controller based on
your system. See your PowerEdge system
documentation for more details.
• Three Gigabit Network Interface
Cards(NICs).
Gigabit Ethernet switch (two required) See dell.com/oracle for information on
supported configurations.
For Dell/EMC AX4-5F, CX3-10C, CX3-
20, CX3-20F, CX3-40, CX3-40F, CX3-80,
CX4-120, CX4-240, CX4-480, CX4-960
Fibre Channel storage system
See the Dell/EMC system
documentation for more details.
For Direct-attached SAS Dell PowerVault
MD3000 with MD1000 expansion
storage system.
See your Dell PowerVault MD3000 and
MD1000 storage system documentation
for more details.
For Direct-attached or switched Dell
PowerVault MD3000i with MD1000
expansion storage system.
See your Dell PowerVault MD3000i and
MD1000 storage system documentation
for more details.
Table 2-3. Oracle Database 10g/11g Standard Edition on Microsoft Windows
Server 2003 R2 SP2 or Windows Server 2008 SP2 Standard x64 Editions
Minimum Hardware Requirements (continued)
Hardware Component Configuration