Owner's Manual

26 Installing Oracle RAC 11g R1 Using ASM
3 In the Welcome window, click Next .
4 In the Specify Home Details window, accept the default settings
(
%System drive%\product\11.1.0\crs ) and click Next .
NOTE: Record the OraCR11g_home (CRS Home) path because you will need
this information later.
5 In the Product-Specific Prerequisite Checks window, click Next .
6 In the Specify Cluster Configuration window, perform the following steps:
a Verify the public, private, and virtual host names for the primary node.
b If you want to change these values, click Edit and enter the desired
values, and click
OK .
c Click Add .
d Enter the public, private, and virtual host names for the second node,
and click
OK .
7 Click Next .
The
Specify Network Interface Usage window is displayed, showing a list of
cluster-wide network interfaces.
8 In the Interface Type drop-down menus, configure the public Interface
Ty p e
as Public and the private Interface Type as Private (if required) by
selecting the
Interface Name and clicking Edit . Select the correct
Interface Type and click OK.
9 Click Next .
10 In the Cluster Configuration Storage window, perform the following steps
for the OCR disk:
a Locate the two 300 MB partitions that you created using the
procedures in the
Oracle Database on Microsoft Windows Server x64
Storage and Networking Guide
.
b Select the first partition and click Edit .
c In the Specify Disk Configuration window, select Place OCR
(Primary) on this partition
and click OK .