Owner's Manual

20 Installing Oracle RAC 11g R1 Using OCFS
Configuring the Listener
This section describes the steps to configure the listener, which is required for
a remote client connection to a database.
NOTE: The procedure in this section requires that the patch already be installed.
On node 1, perform the following steps:
1
Click Start , select Run , and type:
netca
2
Click OK .
3 In the Real Application Clusters Configuration window, select Cluster
Configuration
and click Next .
4 In the Real Application Clusters, Active Nodes window, select Select all
nodes
and click Next .
5 In the Welcome window, select Listener Configuration and click Next .
6 In the Listener Configuration, Listener window, select Add and click
Next .
7 In the Listener Configuration, Listener Name window in the Listener
name
field, accept the default setting and click Next .
8 In the Listener Configuration, Select Protocols window, in the Selected
protocols
field, select TCP and click Next .
9 In the Listener Configuration, TCP/IP Protocol window, select Use the
standard port number of 1521
and click Next .
10 In the Listener Configuration, More Listeners window, select No and
click
Next .
11 In the Listener Configuration Done window, click Next .
12 In the Welcome window, click Finish .