Owner's Manual

44 Configuring Storage and Networking for Oracle RAC Database
g Click Finish .
h Repeat step a through step g to create an additional OCR disk.
10 Create a logical drive for the Voting Disk.
a On the partition area of the disk identified for the OCR and voting
disk (2 GB LUN/virtual disk), right-click the free space and select
New Logical Drive .
The
Welcome to the New Partition wizard is displayed.
b Click Next .
c In the Select Partition Type window, select Logical drive and click
Next .
d In the Specify Partition Size window, in the Partition size in MB field,
type
50 and click Next .
e In the Assign Drive Letter or Path window, select Do not assign a
drive letter or drive path
and click Next .
f In the Format Partition window, select Do not format this partition
and click
Next .
g Click Finish .
h Repeat step a to step g to create two additional voting disk partitions.
NOTE: If you are using Redundant Voting Disk and OCR, repeat the steps outlined in
step 9 and step 10 for the redundant Voting Disk and OCR.
Preparing the Database Disk and Flash Recovery Area for Database
Storage With OCFS
This section provides information for creating logical drives that will be used
to create the Oracle’s Clustered File System (OCFS) storage disk.
NOTE: When using Automatic Storage Management (ASM), the ASM data disk
group should be larger than your database (multiple LUNs) and the ASM Flash
Recovery Area disk group should be at least twice the size of your data disk group.
NOTE: If you are creating the logical drives that are used to create the ASM
storage disk, ignore the following steps and see "Preparing the Database Disk and
Flash Recovery Area for Database Storage With OCFS" on page 44.