Owner's Manual

32 iSCSI Cluster Setup for Dell EqualLogic PS Series Storage Systems
5 On the Advanced Settings window General tab, perform the following
configurations:
a Choose Microsoft iSCSI Initiator by the Local adapter drop-down
menu.
b Choose an iSCSI initiator IP address by the Source IP drop-down
menu.
c Choose EqualLogic group IP address by the Target Portal drop-down
menu.
d Select the CHAP logon information check box.
e Enter the CHAP user name defined in EqualLogic storage, by the
User name box.
f Enter the CHAP password defined in EqualLogic storage, by the
Tar ge t secret box.
g Click OK .
6 On the Log On to Target window, click OK .
7 On the iSCSI Initiator Properties window Targets tab, the status of the
logged on volume should be Connected.
8 Repeat step 3 to step 7 to log on to the same volume for every other iSCSI
initiator IP addresses.
9 Repeat step 3 to step 8 to log on to all other volumes created for the
database.
10 Repeat step 1 to step 9 on all other hosts in the cluster.