Owner's Manual

iSCSI Cluster Setup for Dell EqualLogic PS Series Storage Systems 31
Installing Microsoft iSCSI Initiator
1 Click Start → Settings → Control Panel → Add or Remove Programs .
2 Select Microsoft iSCSI Initiator , click Remove .
This step is performed to remove the initiator 2.0.7 which is packaged with
the current HIT 3.1.2.
3 On the Software Update Removal Wizard window, click Next .
4 On the Software Update Removal Wizard window, click Finish .
5 Once server is back up, download the Microsoft iSCSI initiator 2.0.8 on
your database server.
6 Double click Initiator-2.08-build3825-x64fre.exe to launch the
installation window.
7 On the Software Update Installation Wizard , click Next .
8 On the Microsoft iSCSI Initiator Installation window, select Initiator
Service, Software Initiator, and Microsoft MPIO Multipathing Support
for iSCSI
. Click Next .
9 On the License Agreement window, click I Agree , and click Next .
10 On the Completing the Microsoft iSCSI Initiator Installation Wizard
window
, click Finish . This will restart the server.
11 Repeat step 1 to step 10 on all other hosts in the cluster.
Configuring Microsoft iSCSI Initiator
1 Double click the Microsoft iSCSI Initiator icon on desk top.
2 On the iSCSI Initiator Properties window Discovery tab, the IP address of
the EqualLogic group address should already be populated by the HIT tool
kit.
3 On the iSCSI Initiator Properties window Targets tab, click on one
volume that was created for the Oracle database. Click
Log On .
4 On the Log On to Target window, check the two boxes by Automatically
r
estore this connection when the system boots, and Enable multi-path .
Click
Advanced .