Owner's Manual

30 iSCSI Cluster Setup for Dell EqualLogic PS Series Storage Systems
6 Highlight Performance Options , then click Properties . The Performance
Options
window is displayed.
7 In the Performance Options window, highlight Flow Control , and set its
value to
Rx & Tx Enabled .
8 Repeat step 2 to step 7 for all other network interfaces used for
iSCSI traffic.
Configuring Host Access to Volumes
Installing and Configuring Dell EqualLogic Host Integration Tool (HIT) Kit
1 Download the HIT tool kit version 3.1.2 on your database server.
2 Double click Setup64.exe to launch the installation window.
3 In the Welcome to the Host Integration Tools 3.1.2, update program
window, click
Next .
4 In the License Agreements window, select I accept the terms of all the
license agreements
, and click Next .
5 On the Installation Type window, click Next .
6 On the Ready to install the components window, click Install .
The
Installation Status window and the Software Update Installation
Wizard
window is displayed.
7 On the Installation Complete window, click Finish .
8 On the System Restart Required window, select Y es, I want to restart my
computer now
, and click OK .
9 Once the server is back up, a Remote Setup Wizard window is displayed.
10 Select Configure MPIO settings for this computer, then click Next .
11 Move the iSCSI network subnets under Subnets included for MPIO .
Move all other network subnets under
Subnets excluded from MPIO .
Check the box beside
Load balance across paths . Click Finish .
12 Repeat step 1 to step 11 on all other hosts in the cluster.