Owner's Manual

24 iSCSI Cluster Setup for Dell PowerVault MD3000i and MD1000
Task 3: Verifying and Upgrading the Firmware
• Discover the host server’s direct-attached storage using the Modular Disk
Storage Manager software that is installed on the host server.
• Verify that the firmware for the following storage components is at the
minimum required version. Refer to the Solutions Deliverable List (SDL)
for the firmware version requirements.
• MD3000i storage system firmware
• MD1000 expansion enclosure firmware
Post Installation Tasks
After installing the drivers and the software, perform the post installation
tasks listed in the MD3000i Installation Guide to create the environment
shown in Table 4-1.