Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Oracle Database 11g R1 Enterprise or Standard Edition on Microsoft Windows Server x64 Version 1.1
11121314151617181920
14 Fibre Channel Cluster Setup
Figure 2-2. Cabling in a Dell/EMC SAN-Attached Fibre Channel Cluster
Use the following procedure to configure your Oracle cluster storage system
in a four-port, SAN-attached configuration.
1
Connect one optical cable from SP-A port 0 to Fibre Channel switch 0.
2
Connect one optical cable from SP-A port 1 to Fibre Channel switch 1.
3
Connect one optical cable from SP-B port 0 to Fibre Channel switch 1.
4
Connect one optical cable from SP-B port 1 to Fibre Channel switch 0.
5
Connect one optical cable from HBA 0 on node 1 to
Fibre Channel switch 0.
6
Connect one optical cable from HBA 1 on node 1 to
Fibre Channel switch 1.
7
Connect one optical cable from HBA 0 of each additional node to
Fibre Channel switch 0.
8
Connect one optical cable from HBA 1 of each additional node to
Fibre Channel switch 1.
Cluster node 1
Cluster node 2
sw1
CX4-960 storage system
sw0