Owner's Manual

Fibre Channel Cluster Setup 13
Before You Begin
Verify that the following tasks have been completed for your cluster:
• All hardware is installed in the rack.
• All hardware interconnections are configured.
• All virtual disks/logical unit numbers (LUNs), RAID groups, and storage
groups are created on the storage system.
• Storage groups are assigned to the cluster nodes.
CAUTION: Before you perform the procedures in the following sections, ensure
that the system hardware and cable connections are installed correctly.
Cabling Your Dell/EMC Fibre Channel Storage
You can configure your Oracle
®
cluster storage system in a four-port storage
area network (SAN) attached configuration, depending on your needs.
See the following procedures for both configurations.
Figure 2-2 illustrates the hardware connections used in setting up a
SAN-attached Fibre Channel cluster.