Owner's Manual

31
10 Create a logical drive for the Voting Disk.
a On the partition area of the disk identified for the OCR and voting disk
(2 GB LUN/virtual disk), right-click the free space and select
New Logical
Drive
.
The
Welcome to the New Partition Wizard appears.
b Click Next .
c In the Select Partition Type window, select Logical drive and click Next .
d In the Specify Partition Size window, in the Partition size in MB field,
type
50 and click Next .
e In the Assign Drive Letter or Path window, select Do not assign a drive
letter or drive path
and click Next .
f In the Format Partition window, select Do not format this partition
and click
Next .
g Click Finish .
h Repeat step a through step g two times to create two additional voting
disk partitions.
NOTE: If you are using Redundant Voting Disk and OCR, repeat the steps outlined
in step 9 and step 10 for the redundant Voting Disk and OCR.
Preparing the Database Disk and Flash Recovery Area for Database Storage With OCFS
This section provides information for creating logical drives that will be used
to create the Oracle’s Clustered File System (OCFS) storage disk.
NOTE: When using ASM storage management, the ASM data disk group should be
larger than your database (multiple LUNs) and the ASM Flash Recovery Area disk group
should be at least twice the size of your data disk group.
NOTE: If you are creating the logical drives that are used to create the Automatic
Storage Management (ASM) storage disk, ignore the following steps and see
"Preparing the Database Disk and Flash Recovery Area for Database Storage
With ASM" on page 32.