Owner's Manual

23
d Right-click the Intel NIC , which is identified for NIC teaming and select
Properties.
e Click the Teaming tab.
f Select Team with other Adapters and then select New Team .
g Specify a name for NIC team and click Next .
h In the Select the adapters to include in this team box, select the
remaining network adapters that you identified for NIC teaming and click
Next .
i In the Select a team mode list box, select Adaptive Load Balancing .
j Click Finish to complete the teaming.
k In the Team Properties window, click OK .
l In the Intel NIC's Properties window, click OK .
m Close the Computer Management window.
4 If node 1 is configured with Broadcom NICs, configure NIC teaming by
performing the following steps. If not, go to step 5.
a Click Start → Programs → Broadcom → Broadcom Advanced Control
Suite 3
.
The
Broadcom Advanced Control Suite 3 window appears.
b Highlight Team Management , click Teams , and select Create a Team .
The
Broadcom Teaming Wizard window appears.
c Click Next .
d In the Enter the name for the team field, type Private and click Next.
e In the Team Type field, select Smart Load Balancing (TM) and Failover
(SLB)
and click Next .
f In the Assigning Team Members window, in the Available Adapters box,
select the network adapters you identified for NIC teaming and add them
to the
Team Members box.
NOTE: When configuring integrated Broadcom NICs into a team, the following
warning message will display on PowerEdge 6850 systems:
Including this adapter in a team will disrupt the
system management features. Click Yes to proceed
.