Owner's Manual

20
4
In the Log On to Target window, check the two boxes by Automatically
restore this connection when the system boots
, and Enable multi-path .
Click
Advanced .
5 In the Advanced Settings window General tab, perform the following
configurations:
a Choose Microsoft iSCSI Initiator by the Local adapter drop-down
menu.
b Choose an iSCSI initiator IP address by the Source IP drop-down menu.
c Choose EqualLogic group IP address by the Target Portal drop-down
menu.
d Check the CHAP logon information checkbox.
e Enter the CHAP user name defined in EqualLogic storage, by the User
name
box.
f Enter the CHAP password defined in EqualLogic storage, by the Ta rg et
secret
box.
g Click OK .
6 In the Log On to Target window, click OK .
7 In the iSCSI Initiator Properties window Targets tab, the status of the logged
on volume should be
Connected .
8 Repeat step 1 through step 7 to log on to the same volume for every other
iSCSI initiator IP addresses.
9 Repeat step 1 through step 8 to log on to all other volumes created for
the database.
10 Repeat step 1 through step 9 on all other hosts in the cluster.