Owner's Manual
5
11
In the
Cluster Configuration Storage
window, perform the following steps
for the voting disk:
a
Locate the three 50 MB partitions created using the procedures in
the
Storage and Networking Guide
.
b
Select the first partition and click
Edit
.
c
In the
Specify Disk Configuration
window, select
Place Voting Disk
on this partition
and click
OK
.
d
Repeat steps b and c on the remaining Voting Disk partitions.
12
In the
Cluster Configuration Storage
window, perform the following steps
for the database:
a
Locate the partition created using the procedures in the
Storage and
Networking Guide
.
b
Select the partition and click
Edit
.
c
In the
Specify Disk Configuration
window, select
Format partition
with CFS
.
d
Ensure that the
Use partition for data storage
is selected.
e
Use the drop-down menu of the
Assign Drive Letter
option to assign
a drive letter to the partition.
f
Click
OK
.
13
In the
Cluster Configuration Storage
window, perform the following steps
for flash recovery:
a
Locate the partition created using the procedures in the
Storage
and Networking Guide
.
b
Select the partition and click
Edit
.
c
In the
Specify Disk Configuration
window, select
Format partition
with CFS
.
d
Ensure that
Use partition for data storage
is selected.
e
Use the drop-down menu of the
Assign Drive Letter
option to assign
a drive letter to the partition.
f
Click
OK
.
14
In the
Cluster Configuration Storage
window, click
Next
.
15
Ignore the warning messages and click
OK
.