Owner's Manual

44 Adding and Removing Nodes
5 Click Install .
The
Cluster Node Addition Progress window displays the status of
the node addition process.
6 When prompted, as user root run
/opt/oracle/product/11.1.0/db_1/root.sh on the new node
and press <Enter> when asked to enter the full path name of the local bin
directory.
7 When root.sh finishes running in the Execute Configuration Scripts
window, click
OK .
8 In the End of Installation window, click Exit and click Yes when asked
to confirm.
Reconfiguring the Listener
This section describes the steps to reconfigure the listener, which is required
for remote client connection to a database.
NOTE: The steps below assume that you are willing to stop the listener to
reconfigure the existing listener. Otherwise, the steps may be a little different than
the steps below.
On one node only , perform the following steps:
1 Log in as root .
2 Start the X Window System by typing:
startx
3 Open a terminal window and type:
xhost +
4
As user oracle , stop the listener on all nodes by typing:
lsnrctl stop
5 When this is successful, type netca to start the Net Configuration
Assistant.
6 Select Cluster Configuration and click Next .
7 In the Real Application Clusters → Active Nodes window, click Select All
Nodes
and click Next .