Owner's Manual

Configuring Database Storage on the Host 51
Configuring Database Storage on
the Host
WARNING: Before you begin any of the procedures in this section, read the
safety information that shipped with your system. For additional best practices
information, see the Dell Regulatory Compliance website at
www.dell.com/regulatory_compliance.
Oracle
®
Real Application Clusters (RAC) is a complex database
configuration that requires an ordered list of procedures. The following
sections describe how to verify, adjust and configure the storage disks for the
Fibre Channel, direct-attached SAS, or iSCSI storage on your host.
Verifying and Identifying Your Storage Disks
While configuring the clusters, create partitions on your Fibre Channel,
direct-attached SAS, or iSCSI storage system. To create the partitions, all the
nodes must detect the external storage devices.
NOTE: The procedure in this section describes how to deploy the Oracle database
for direct-attached SAS storage as well as for Fibre Channel storage. For illustration
purposes, Fibre Channel storage nomenclature is used. If direct-attached SAS or
iSCSI storage (Dell™ PowerVault™ MD3000, MD3000i, or Dell EqualLogic™ storage
array) is used, see Table 7-1 to translate Fibre Channel nomenclature to PowerVault
MD3000, MD3000i or Dell EqualLogic™ nomenclature.
Lnx_Stnwt.book Page 51 Jeudi, 16. juillet 2009 1:36 13