Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Oracle Database 11g R1 Enterprise Edition on Linux Version 1.2

iSCSI Cluster Setup for EqualLogic Storage Systems 43

For example, the following command discovers four volumes at group

IP address

10.16.7.100

, from a host with two interfaces named as

eth0-iface

and

eth1-iface

:

# iscsiadm -m discovery -t st -p 10.16.7.100 --

interface=eth0-iface --interface=eth1-iface

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-90ee59d02-e26f999767b4942e-mdi-ocr-css-

spfile

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-90ee59d02-e26f999767b4942e-mdi-ocr-css-

spfile

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-93ee59d02-674f999767d4942e-mdi-data1

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-93ee59d02-674f999767d4942e-mdi-data1

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-95ce59d02-2e0f999767f4942e-mdi-data2

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-95ce59d02-2e0f999767f4942e-mdi-data2

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-97be59d02-d7ef99976814942e-mdi-fra1

10.16.7.100:3260,1 iqn.2001-05.com.equallogic:0-

8a0906-97be59d02-d7ef99976814942e-mdi-fra1

10

Verify all volumes are discovered from all the

ifaces

on the host:

iscsiadm -m discovery --print=1

For example:

# iscsiadm -m discovery --print=1

SENDTARGETS:

DiscoveryAddress: 10.16.7.100,3260

Target: iqn.2001-05.com.equallogic:0-8a0906-

90ee59d02-e26f999767b4942e-mdi-ocr-css-spfile

Portal: 10.16.7.100:3260,1

Iface Name: eth0-iface

Iface Name: eth1-iface

Target: iqn.2001-05.com.equallogic:0-8a0906-

Lnx_Stnwt.book Page 43 Jeudi, 16. juillet 2009 1:36 13