Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Oracle Database 11g R1 Enterprise Edition on Linux Version 1.1
11121314151617181920
Fibre Channel Cluster Setup 15
SAN-Attached Fibre Channel Configuration
To configure your nodes in a four-port SAN-attached configuration:
1
Connect one optical cable from SP-A port 0 to Fibre Channel switch 0.
2
Connect one optical cable from SP-A port 1 to Fibre Channel switch 1.
3
Connect one optical cable from SP-A port 2 to Fibre Channel switch 0.
4
Connect one optical cable from SP-A port 3 to Fibre Channel switch 1.
5
Connect one optical cable from SP-B port 0 to Fibre Channel switch 1.
6
Connect one optical cable from SP-B port 1 to Fibre Channel switch 0.
7
Connect one optical cable from SP-B port 2 to Fibre Channel switch 1.
8
Connect one optical cable from SP-B port 3 to Fibre Channel switch 0.
9
Connect one optical cable from HBA 0 on node 1 to Fibre Channel switch 0.
10
Connect one optical cable from HBA 1 on node 1 to Fibre Channel switch 1.
11
Connect one optical cable from HBA 0 on node 2 to Fibre Channel switch 0.
12
Connect one optical cable from HBA 1 on node 2 to Fibre Channel switch 1.