Owner's Manual

3
Terminology Used in this Document
This document uses the terms logical unit number (LUN) and virtual disk .
These terms are synonymous and can be used interchangeably. The term
LUN is
commonly used in a Dell|EMC Fibre-Channel storage system environment and
virtual disk is commonly used in a Dell PowerVault SAS (Dell MD3000i and
Dell MD3000i with MD1000 expansion) storage environment.
Fibre Channel Cluster Setup
Your Dell Professional Services representative completed the setup of your Fibre
Channel cluster. Verify the hardware connections and the hardware and software
configurations as described in this section. Figure 1 and Figure 3 show an overview
of the connections required for the cluster, and Table 1 summarizes the cluster
connections.
Verify that the following tasks are completed for your cluster:
• All hardware is installed in the rack.
• All hardware interconnections are set up as shown in Figure 1 and
Figure 3,
and
listed in Table 1.
• All Logical Unit Numbers (LUNs), Redundant Array of Independent Disks
(RAID) groups, and storage groups are created on the Dell|EMC Fibre
Channel storage system.
• Storage groups are assigned to the nodes in the cluster.
Before continuing with the following sections, visually inspect all hardware and
interconnections for correct installation.