Owner's Manual

Restart iSCSI service for the new configuration to take effect.

service iscsi stop

service iscsi start

Discover targets from all ifaces created in step 5.

iscsiadm -m discovery -t st -p group_ip_address --

interface=iface_name1 --interface=iface_name2 --

interface=iface_name3 --interface=iface_name4

group_ip_address

is the IP address of the EqualLogic storage group.

iface_name1

iface_name2

iface_name3

iface_name4

(…) are

the network interfaces (defined in step 5) on the host that will be used for

iSCSI traffic.

For example, the following command discovers four volumes at group IP

address 10.16.7.100, from a host with two interfaces named as eth0-iface and

eth1-iface.

# iscsiadm -m discovery -t st -p 10.16.7.100 --

interface=eth0-iface --interface=eth1-iface