Owner's Manual

6
15
In the Specify Voting Disk Location window, perform the following steps:
a In the Votingdisk Configuration box, select External Redundancy .
b In the Specify Votingdisk Location field, type:
/dev/emcpowerb1
or
/u01/votingdisk1 if using OCFS2.
c In the Additional Voting Disk 1 Location field, type:
/dev/emcpowerb2
or
/u01/votingdisk2
d In the Additional Voting Disk 2 Location field, type:
/dev/emcpowerb3
or
/u01/votingdisk3
e Click Next .
16 In the Summary window, click Install .
Oracle Clusterware is installed on your system.
When complete, the
Execute Configuration scripts window appears.
17 Follow the instructions in the window and then click OK .
NOTE: If root.sh hangs while formatting the Voting disk, apply Oracle patch
4679769 and then repeat this step.
NOTE: Run root.sh sequentially on all nodes starting with the primary node.
For example, run root.sh on node 1. When root.sh completes on node 1, continue
with node 2 and so on. Do not run root.sh on more than one node at a time.
18 In the Configuration Assistants window, ensure that Succeeded appears in
the
Status column for each tool name.
Next, the
End of Installation window appears.
19 Click Exit .