Owner's Manual

5
12 In the Specify Cluster Configuration window, add the nodes that will be
managed by Oracle Clusterware.
a Click Add .
b Type a name for the Public Node Name , Private Node Name , and Virtual
Host Name
, andthenclick OK .
c Repeat step a and step b for the remaining nodes.
d In the Cluster Name field, type a name for your cluster.
The default cluster name is
crs .
e Click Next .
13 In the Specify Network Interface Usage window, ensure that the public and
private interface names are correct.
To modify an interface, perform the following steps:
a Select the interface name and click Edit .
b In the Edit private interconnect type window in the Interface Type box,
select the appropriate interface type and then click
OK .
c In the Specify Network Interface Usage window, ensure that the public
and private interface names are correct, and then click
Next .
14 In the Specify Oracle Cluster Registry (OCR) Location window, perform
the following steps:
a In the OCR Configuration box, select Normal Redundancy .
b In the Specify OCR Location field, type:
/dev/emcpowera1
or
/u01/ocr1.dbf if using OCFS2
c In Specify OCR Mirror Location field, type:
/dev/emcpowera2
or
/u01/ocr2.dbf.
d Click Next .