User's Manual

Configuring Microsoft iSCSI Initiator
1 Double click the Microsoft iSCSI Initiator icon on the desktop.
The
iSCSI Initiator Properties window appears.
2 On the Discovery tab, the IP address of the EqualLogic group address should
already be populated by the HIT tool kit.
3 On the Ta rg et s tab, click on one volume that was created for the Oracle
database and click
Log On .
4 In the Log On to Target window, check the two boxes by Automatically
restore this connection when the system boots
, and Enable multi-path .
Click
Advanced .
The
Advanced Settings window appears.
5 On the General tab, perform the following configurations:
a Choose Microsoft iSCSI Initiator in the Local adapter pull down menu.
b Choose an iSCSI initiator IP address in the Source IP pull down menu.
c Choose EqualLogic group IP address in the Target Portal pull down
menu.
d Check the CHAP logon information checkbox.
e Enter the CHAP user name, defined in EqualLogic storage, in the
User name box.
f Enter the CHAP password, defined in EqualLogic storage, in the
Target secret box.
g Click OK .
6 In the Log On to Target window, click OK .
7 In the iSCSI Initiator Properties window → Targets tab, the status of the
logged on volume should be
Connected .
8 Repeat step 3 to step 7 to log on to the same volume for every other iSCSI
initiator IP addresses.
9 Repeat step 3 to step 8 to log on to all other volumes created for the database.
10 Repeat step 1 to step 9 on all other hosts in the cluster.
51296A00.fm Page 15 Tuesday, February 3, 2009 4:10 PM