User's Manual

9 In the System Restart Required window, select Yes, I want to restart my
computer now
, and click OK .
10 Once the server is up, a Remote Setup Wizard window appears.
11 Select Configure MPIO settings for this computer , then click Next .
12 Move the iSCSI network subnets under Subnets included for MPIO . Move all
other network subnets under
Subnets excluded from MPIO . Check the box
beside
Load balance across paths . Click Finish .
13 Repeat step 1 to step 12 on all other hosts in the cluster.
Installing Microsoft
®
iSCSI Initiator
1 Start Add or Remove Programs .
2 Select Microsoft iSCSI Initiator , click Remove . This is to remove the
initiator 2.0.7 which is packaged with the current HIT 3.1.2.
3 In the Software Update Removal Wizard window, click Next and then click
Finish .
4 Once the server is up, download the Microsoft iSCSI initiator 2.0.8 on your
database server.
5 Double click Initiator-2.08-build3825-x64fre.exe to launch the installation
window.
6 In the Software Update Installation Wizard , click Next .
7 In the Microsoft iSCSI Initiator Installation window, select Initiator Service ,
Software Initiator , and Microsoft MPIO Multipathing Support for iSCSI .
Click
Next .
8 In the License Agreement window, click I Agree , and click Next .
9 In the Completing the Microsoft iSCSI Initiator Installation Wizard
window, click
Finish . This will restart the server.
10 Repeat step 1 to step 9 on all other hosts in the cluster.
51296A00.fm Page 14 Tuesday, February 3, 2009 4:10 PM