Owner's Manual

40 Configuring Network and Storage for Oracle RAC Database
8 On the System Restart Required window, select Y es, I want to restart my
computer now
, and click OK .
9 When the server restarts, a Remote Setup Wizard window is displayed.
10 Select Configure MPIO settings for this computer, then click Next .
11 Move the iSCSI network subnets under Subnets included for MPIO .
Move all other network subnets under
Subnets excluded from MPIO .
Select Default load balancing policy (Least Queue Depth). Click
Finish .
12 Repeat step 1 to step 11 on all other hosts in the cluster.
Configuring Microsoft iSCSI Initiator
To configure Microsoft iSCSI initiator:
1
Double-click the Microsoft iSCSI Initiator icon on desk top.
2 On the iSCSI Initiator Properties window Discovery tab, the IP address of
the EqualLogic group address should already be populated by the HIT tool
kit.
3 On the iSCSI Initiator Properties window Ta rg et s tab, click on one
volume that was created for the Oracle database. Click
Log On .
4 On the Log On to Target window, check the two boxes by
Automatically restore this connection when the system boots, and
Enable multi-path
.
5 Click Advanced .
6 On the Advanced Settings window General tab, perform the following
configurations:
a Choose Microsoft iSCSI Initiator by the Local adapter drop-down
menu.
b Choose an iSCSI initiator IP address by the Source IP drop-down
menu.
c Choose EqualLogic group IP address by the Target Portal drop-down
menu.
d Select the CHAP logon information check box.
e Enter the CHAP user name defined in EqualLogic storage, by the
User name box.
Book.book Page 40 Wednesday, July 14, 2010 8:10 PM