Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Oracle Database 10g R2 Enterprise or Standard Edition on Microsoft Windows Server x64
11121314151617181920
14 Fibre Channel Cluster Setup
Figure 2-2. Cabling in a Dell/EMC SAN-Attached Fibre Channer Cluster
To configure your Oracle cluster storage system in a four-port, SAN-attached
configuration (see Figure 2-2):
1
Connect one optical cable from SP-A port 0 to Fibre Channel switch 0.
2
Connect one optical cable from SP-A port 1 to Fibre Channel switch 1.
3
Connect one optical cable from SP-B port 0 to Fibre Channel switch 1.
4
Connect one optical cable from SP-B port 1 to Fibre Channel switch 0.
5
Connect one optical cable from HBA 0 on node 1 to
Fibre Channel switch 0.
6
Connect one optical cable from HBA 1 on node 1 to
Fibre Channel switch 1.
7
Connect one optical cable from HBA 0 of each additional node to
Fibre Channel switch 0.
8
Connect one optical cable from HBA 1 of each additional node to
Fibre Channel switch 1.
Two HBA Ports for Node 1
Two HBA Ports for Node 2
sw1
Dell/EMC CX4-480 Fibre Channel Storage
sw0
SP-B
SP-A
Book.book Page 14 Wednesday, July 14, 2010 8:10 PM