Owner's Manual
48 iSCSI Cluster Setup for EqualLogic Storage Systems
The example below shows the MTU set to 9000.
# cat /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
HWADDR=00:15:17:80:43:50
ONBOOT=yes
TYPE=Ethernet
BOOTPROTO=none
IPADDR=10.16.7.125
NETMASK=255.255.255.0
USERCTL=no
MTU=9000
Verify the Jumbo Frame setting using the ifconfig command:
$inconfig eth2
eth2 Link encap:Ethernet HWaddr
00:15:17:80:43:50
inet addr:10.16.7.125 Bcast:10.16.7.255
Mask:255.255.255.0
inet6 addr: fe80::215:17ff:fe80:4350/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:9000
Metric:1
RX packets:3348411 errors:0 dropped:0
overruns:0 frame:0
TX packets:2703578 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10647052076(9.9 GiB)TX
bytes:11209177325(10.4 GiB)
Memory:d5ee0000-d5f00000