Owner's Manual

34 iSCSI Cluster Setup for the PowerVault Enclosure
PowerVault
MD3000i storage
system
• Two CAT 5e/6 cables connected to LAN (one from each storage
processor module) for the management interface
• Two CAT 5e/6 cables per storage processor for iSCSI
interconnect
NOTE: For additional information on the PowerVault MD3000i
storage enclosure, see your PowerVault MD3000i set-up
documentation at support.dell.com/manuals.
PowerVault
MD1000 storage
expansion
enclosure
(optional)
Additional SAS cable connections, as required for the
PowerVault MD1000 expansion enclosure
Table 5-1. iSCSI Hardware Interconnections (continued)
Cluster Component Connections