Owner's Manual

SAS Cluster Setup for the PowerVault Expansion Enclosure 31
Initial Setup Tasks
1 The name of the first storage array found appears in the devices tab of the
EMW. To see a list of all storage arrays found on the local network, expand
the discovered storage arrays tab in the device pane of the EMW.
2 The default name for a newly installed MD3200 Series storage array is
Unnamed . If another name appears in MDSM, click the down arrow next
to the name and click
Unnamed in the drop-down list.
3 Double-click the discovered array to launch the array management window
and make changes to the configuration of the array.
4 Click Perform Initial Setup Tasks to see an outline and links to the
remaining post-installation tasks. The array is now ready to be configured.
For information about the array configuration, see the Owner’s Manual.
NOTE: Before configuring the storage array, check the status icons on the
Device pane to ensure that the enclosures in the storage array are in an
Optimal status. For more information on the status icons, see the Owner’s
Manual at support.dell.com/manuals.
Enabling Premium Features (Optional)
If you ordered premium features, follow the instructions on the Premium
Features Card that shipped with your system to install the additional features.